The compensation effect: A fact or a fiction

In this article, the facts and fictions surrounding the compensation effect is explored. False compensation effect occurs mainly due to: propagation of computational and experimental errors resulting in inaccurate estimates of the Arrhenius parameters; and, the natural compensation between InA andE. Since Arrhenius parameters are sensitive to errors in temperature; the errors due to uncertainty in temperature should be minimized to eliminate false compensation effect. Increasing the experimental temperature range is helpful in minimizing errors due to uncertainty in temperature. A point of concurrence in a plot of Ink and 1/T establishes the occurrence of true compensation effect. True compensation effect has been shown to be a useful tool in chemical research for: identifying the governing reaction mechanism; predicting the effects of various reaction parameters; and, correlating and reducing experimental data.

---

Zusammenfassung In dieser Mitteilung werden Fakten und Vorstellungen betreffs des Kompensationseffektes untersucht. Falsche Kompensationseffekte werden hauptsächlich verursacht durch: eine ungenaue Ermittlung der Arrheniusparameter durch die Fortpflanzung von rechnerischen und experimentellen Fehlern sowie dem natürlichen Kompensationseffektes zwischen InA undE. Das Arrheniusparameter gegenüber Fehler im Temperaturwert sehr empfindlich sind, sollten Temperaturungenäuigkeitsfehler zur Vermeidung eines falschen Kompensationseffektes minimalisiert werden. Zur Verminderung der aus der Temperaturungenauigkeit resultierenden Fehler ist es von Nutzen, den Temperaturbereich des Experimentes zu erweitern. Ein wahrer Kompensationseffekt wird durch einen Schnittpunkt in einem Ink-1/T Diagramm angezeigt. Es wird gezeigt, daß der wahre Kompensationseffekt ein nutzvolles Mittel in der chemischen Forschung darstellt: zur Feststellung des dominierenden Reaktionsmechanismus, zur Vorhersage der einflüsse verschiedener Reaktionsparameter und zur Aufarbeitung und Schlußfolgerung von bzw. aus experimentellen Daten.

---

, . , , lnA E. , , . . Ink-1/T . , , , .

---

---

The author would like to thank the reviewer for his constructive criticisms.     

An approximate max-flow min-cut relation for undirected multicommodity flow,with applications

In this paper, we prove the first approximate max-flow min-cut theorem for undirected multicommodity flow. We show that for a feasible flow to exist in a multicommodity problem, it is sufficient that every cut's capacity exceeds its demand by a factor ofO(logClogD), whereC is the sum of all finite capacities andD is the sum of demands. Moreover, our theorem yields an algorithm for finding a cut that is approximately minimumrelative to the flow that must cross it. We use this result to obtain an approximation algorithm for T. C. Hu's generalization of the multiway-cut problem. This algorithm can in turn be applied to obtain approximation algorithms for minimum deletion of clauses of a 2-CNF formula, via minimization, and other problems. We also generalize the theorem to hypergraph networks; using this generalization, we can handle CNF clauses with an arbitrary number of literals per clause.Most of the results in this paper were presented in preliminary form in Approximation through multicommodity flow,Proceedings, 31th Annual Symposium on Foundations of Computer Science (1990), pp. 726–737.Research supported by the National Science Foundation under NSF grant CDA 8722809, by the Office of Naval and the Defense Advanced Research Projects Agency under contract N00014-83-K-0146, and ARPA Order No. 6320, Amendament 1.Research supported by NSF grant CCR-9012357 and by an NSF Presidential Young Investigator Award.     

Synthesis of N-substituted piperazinyl carbamoyl and acetyl derivatives of tetrahydropapaverine: potent antispasmodic agents

The synthesis and structure-activity-relationship (SAR) for a series of N-substituted piperazinyl carbamoyl 7-15 and piperazinyl acetyl 18-26 derivatives of tetrahydropapaverine have been carried out. The general synthetic methods of carbamoyl tetrahydropapaverine analogues involve N-substituted piperazines and carbamoyl imidazole tetrahydropapaverine as starting materials. Another route for synthesizing these compounds, involving the formation of carbamoyl imidazole piperazine has also been explored. Acylation of tetrahydropapaverine followed by substitution with various piperazinyl moities afforded the acetyl tetrahydropapaverine derivatives. Variously substituted piperazines have been used to monitor the effect of electron releasing and electron withdrawing substituents upon the antispasmodic activity of the molecules. Effect of varying electron densities on the antispasmodic activity, by altering the position of these groups on the benzene ring has also been monitored. Pharmacological methods involve the in vitro antispasmodic activity studies on a freshly removed guinea pig ileum using a force displacement transducer amplifier connected to a physiograph. Among the analogues synthesized in the present study, a promising compound 7, a potent muscle relaxant as compared to papaverine has been obtained.     

Extraction and micro-determination of manganese(II) with oxine and aliquat 336

A sensitive and selective method has been developed for the micro-determination of Mn(II) by the selective extraction of the yellow Mn(II)-8-hydroxyquinolinate complex with a liquid ion-exchanger, Aliquat 336, from basic medium. The molar absorptivity of the complex is 2.2 x 10(4)1.mole(-1).cm(-1) at 420 nm and the colour system obeys Beer's law in the range 0.1-3.5 ppm Mn(II) in the final solution. The composition and stability of the complex are discussed. Potential interferents have been examined and the method is applied to analysis of standard steel and bronze samples.     

Spectrophotometric determination of isoproturon using p-aminoacetophenone and its application in environmental and biological samples

A simple and sensitive method for the determination of isoproturon, a widely used herbicide is described here which is based on alkaline hydrolysis of isoproturon to its corresponding primary amine followed by diazotization and coupling with p-aminoacetophenone in alkaline medium. The absorption maxima of the coloured compound formed is measured at 525 nm. Beer's law is obeyed over the concentration range of 0.5-5.0 mug in a final solution volume of 25 ml (0.02-0.2 ppm). The molar absorptivity and Sandell's sensitivity were found to be 8.6x10(5) l mol(-1) cm(-1) and 0.0002 mug cm(-2), respectively. The method has been satisfactorily applied to the determination of isoproturon in environmental and biological samples.     

A study of equilibrium between cadmium cyanide and alkali halides and thiocyanate by solubility measurements

Summary A study of the Cd(CN)₂ +x X^– [Cd(CN)₂X _x ] ^x– equilibrium (where X = Cl, Br or CNS) has been carried out at 18° and 38° by measuring the solubility of cadmium cyanide in potassium chloride, bromide and thiocyanate at various concentrations, and at a high ionic strength (6 M) maintained with sodium perchlorate to minimise the effect of activity coefficients. Equilibrium constants forx = 1 and 2 have been calculated and clearly favour the situation wherex = 1. H values for the dissociation of [Cd(CN)₂X]^– have also been calculated.     

Stability-Indicating HPLC Method for the Determination of Metadoxine as Bulk Drug and in Pharmaceutical Dosage Form

A sensitive and reproducible method is described for the quantitative determination of metadoxine in the presence of its degradation products. The method was based on high performance liquid chromatographic separation of the drug from its degradation products on the reversed phase, kromasil column [C₁₈ (5-micron, 25 cm × 4.6 mm, i.d.)] at ambient temperature using a mobile phase consisting of methanol and water (50: 50, v/v). Flow rate was 1.0 mL min^?1 with an average operating pressure of 180 kg cm^?2 and t _R was found to be 2.85 ± 0.05 min. Quantitation was achieved with UV detection at 286 nm based on peak area with linear calibration curves at concentration range 10–100 μg mL^?1. This method has been successively applied to pharmaceutical formulation. No chromatographic interference from the tablet excipients was found. The method was validated in terms of precision, robustness, recovery and limits of detection and quantitation. Drug was subjected to acid, alkali and neutral hydrolysis, oxidation, dry heat, wet heat treatment and photo and UV degradation. As the proposed method could effectively separate the drug from its degradation products, it can be employed as stability indicating one. Moreover, the proposed HPLC method was utilized to investigate the kinetics of the acidic, alkaline and oxidative degradation processes at different temperatures and their respective apparent pseudo first order rare constant, half-life and activation energy was calculated with the help of Arrhenius plot. In addition the pH-rate profile of degradation of metadoxine in constant ionic strength buffer solutions with in the pH range 2–11 was studied.     

Solvent extraction and photometric determination of a microgram of cerium with N-p-tolyl-p-chlorobenzohydroxamic acid

A spectrophotometric method for determination of a microgram quantity of cerium with N-p-tolyl-p-chlorobenzohydroxamic acid is described. The orange-red-colored complex is extracted from chloroform at pH 9 which absorbs between 460 and 465 nm. Beer's law is obeyed at this wavelength. A clean-cut separation from many commonly occurring metal ions is easily accomplished. The system obeys Beer's law within the range of 0.5–28 ppm of cerium(IV). The molar absorptivity of cerium-N-p-tolyl-p-chlorobenzohydroxamic acid complex is 4.5 × 10³ liters mol^?1 cm^?1.     

Oxidation of lysine by ferricyanide in presence of osmium(VIII)

Osmium(VIII) catalysed oxidation of lysine by ferricyanide in excess ferrocyanide shows a complex kinetics. The order in lysine falls, from 1 to 0 while that in ferricyanide increases from 0 to 2 with large increase in lysine concentration. The rates were directly proportional to [Os(VIII)] and {Const.+[Fe(CN) ₆ ⁴ ]}. A suitable mechanism is proposed and discussed.

---

Oxidation von lysin mittels ferricyanid in der gegenwart von osmium(VIII)

Zusammenfassung Die von Os(VIII) katalysierte Oxidation von Lysin mit Ferricyanid in überschüssigem Ferrocyanid zeigt eine komplexe Kinetik. Bei starker Steigerung der Lysinkonzentration fällt die Ordnung bezüglich Lysin von 1 auf 0, während bezüglich Ferricyanid eine Erhöhung, von 0 auf 2 festzustellen ist. Die Geschwindigkeitskonstanten waren direkt proportional zu [Os(VII)] und {Const.+[Fe(CN) ₆ ⁴ ]}. Es wird ein möglicher Mechanismus vorgeschlagen und diskutiert.